8 products

8 products

Sale
Quick view
Makerbase MKS Robin Nano V2.0...
$48.39 USD from $44.09 USD Save 9%
Sale
Quick view
3D Printer Power Monitoring Module...
$32.39 USD $25.11 USD Save 22%
Sale
Quick view
Sharp04 LS055R1SX04 With Glass protect...
$46.48 USD from $36.03 USD Save 22%
Sale
Quick view
3D Printer Board 32bit for...
$50.72 USD from $40.26 USD Save 21%
Quick view
TEVO Tarantula Pro 3D Printer...
$12.90 USD
Quick view
3D Printer parts heating controller...
from $15.00 USD
Quick view
TEVO 32bit Arm platform Smooth...
$48.18 USD
Quick view
3D Printing touch screen RepRap...
$34.68 USD

Makerbase MKS Robin Nano V2.0 32Bit Control Board 3D Printer parts base on Marlin2.x 3.5 tft touch screen preview Gcode


$44.09 USD $48.39 USD Save 9%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

Shipping List:

1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
2pcs* 10pin cable
1pcs* USB cable
1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
2pcs* 10pin cable
1pcs* USB cable
5pcs* MKS TMC2225
5pcs* Heat Sink
1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
2pcs* 10pin cable
1pcs* USB cable
5pcs* MKS TMC2209
5pcs* Heat Sink
1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
1pcs* MKS Robin WiFi
2pcs* 10pin cable
1pcs* USB cable
1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
1pcs* MKS Robin WiFi
2pcs* 10pin cable
1pcs* USB cable
5pcs* MKS TMC2225
5pcs* Heat Sink
1pcs* MKS Robin Nano V2.0
1pcs* MKS TS35 V2.0
1pcs* MKS Robin WiFi
2pcs* 10pin cable
1pcs* USB cable
5pcs* MKS TMC2209
5pcs* Heat Sink

Overview:

MKS Robin Nano V2.0 have many highlights and key upgrades compared to the MKS Robin Nano V1.2. It's firmware is based on marlin 2.x,support uart/spi drive mode,support TFT35/12864 with box header connector,with onboard 4k EEPROM...and so on.

Parameter:

Name: MKS Robin Nano V2.0 Hole size: 102*76(mm)
Outer Size: 110*84(mm) Processor: STM32F103VET6
Input voltage：12V~24V 5A~15A Stepper driver：4988,2225,2208,2209…
Temp sensor interface：NTC100K、31855 TFT screen：MKS TS35
Printing file format：G-code
Support the machine construction：XYZ/delta/kossel/Ultimaker/corexy
Recommended software：Cura/Simplify3d/Pronterface/Prpetier-Host
Firmware upgrade：SD Card

Size:

MKS Robin Nano V2.0 use MKS TS35 as TFT screen.The size of MKS TS35 is 15mm longer than Robin TFT35 for reserved knob, the hole position is compatible.

Wiring:

Highlights:

Uart mode can be used on MKS Robin Nano V2.0 (TMC2208,TMC2209,TMC2225)
Support sensorless-homing
Box header connector, more solid and stable
Onboard 4k EEPROM
Change parameters on touch screen
Shipment Payment Coming Soon!
Press Room Coming Soon!
3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board - Homers 3D Onlinestore

3D Printer Power Monitoring Module Continued to Play Printing Automatically Put off Management Module for Lerdge Board


$25.11 USD $32.39 USD Save 22%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

 

Note: This module should be used with the Lerdge Motherboard, so you need to buy one if you don't have. This link of the module is for spare purpose.
 
Product Description:
The power monitoring module, used with Lerdge 3D printer motherboard, can achieve power continued to play, automatically turning off after the printing finished, the software control the power off, monitor the power status and other functions. It can help to achieve interactive printing, and to help in the cases like the unexpected power off or you have to leave during the printing, and other similar issues, considered to be one of the most useful features in 3D printers.
 
Notice on the power continued to play function: In the case of accidental power failure, the system can detecte that situation immediately by this module. But saving the data in this power off moment takes about 1 to 2 seconds to deal with. Most of the switching power supply in the market have enough power to support the system to save the data after the electricity disconnected. But there are also some power supply may not be able to provide the required power to save, which may result in a failed save, and cannot achieve continue printing where it stopped. In this case, users need to switch to higher power supply, or use back-up power supply.
 
(Most of the similar products in the market are called the power to continue to play module, but strictly speaking, it's not rigorous. Actually, more accurate name is power monitoring module.) The similar products in the market are of the same principle, due to the power capacity, the data cannot be 100% saved successfully when accidental power failure happens.
Shipping list：
5-ms
 
2ms1ms3ms-EN-1000power5-ENduandianxudachictu1000Power Monitoring Module -EN
If you need automatically turning off after the printing finished, please select (COMPLETE OFF) on the touch screen setting interface during the printing process.
PrinterControl_2
Power switch and metal button switch size chart：
-1000
IMG_4967
The old version of the power switch customer feedback is not easy to install, so the power switch is replaced as shown below, click on the image link to view the detailed introduction：
dianyuankaiguan_11ms
Shipment Payment Coming Soon!
Press Room Coming Soon!

Sharp04 LS055R1SX04 With Glass protector MIPI To Sharp03 2K 5.5 inch SX04 LCD Resin For Photon Elegoo mars 3D Printer


$36.03 USD $46.48 USD Save 22%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

LS055R1SX04/03 Sharp04  2K 5.5 inch LCD Resin Panel For 3D Printer

 

Active area      :    68.04(H)X120.96(V)  mm  

Pixel format     :    1440(H)×2560(V) Pixel     

                             1 Pixel =R+G+B dots               

Pixel pitch        :  0.01575(H) x 0.04725(V) mm  

Pixel configuration :  R,G,B vertical stripes              

Display mode    :   Normally Black                   

LDC Driving method :  DC Driving / Column Inversion       

Liquid Crystal Mode :   New Mode2                    

Number of colors  :   16,777,216  Colors                 24 bits

Outline dimensions  ： 70.94(W)×128.49 (H)×1.35(D) TYP mm                 Note 3‐1

Mass     ：          Approx 25 g  

 

 

 

Shipping list：

 

Elegoo Mars /Photon :sharp04 screen + mipi to mipi board（sharp03 to sharp04）+ cable shield + sticky paper

 

Elegoo Mars Pro /Photon s : sharp04 screen+ cable shield + sticky paper

 

 

Care must be taken before purchasing: Photon and Photon s need adapters. Direct connection without an adapter can damage the motherboard.Please let customer service know if you need an adapter or note it directly on your order.

 

If the screen does not light up, you can click here to view the solution.

 

shap04详情_01

屏幕正反大图

shipping list.

 

Be sure to pay attention to the orientation of the adapter connections when using on photon or photon s.

转接板接线

 

 

 

 

shap04详情_02配件通用详情_02下载地址-2配件通用详情_04配件通用详情_06

Shipment Payment Coming Soon!
Press Room Coming Soon!
3D Printer Board 32bit for control board parts motherboard with STM32 ARM 32 Bit Mainboard tmc2208 lv8729 TMC2209 - Homers 3D Onlinestore

3D Printer Board 32bit for control board parts motherboard with STM32 ARM 32 Bit Mainboard tmc2208 lv8729 TMC2209


$51.45 USD $64.81 USD Save 21%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

 

Only X Board: （NO DRIVERS,NO 3.5-INCH TOUCH SCREEN ）

If you already have a driver modules, you already have a 3.5-inch touch screen, you can buy Only X Board.

Tip: The Lerdge X motherboard have to match with our 3.5-inch touch screen to be used. The Lerdge X motherboards are not compatible with the touch screen of the old version of the Lerdge S motherboard.

Note: The Lerdge-X motherboard does not support TMC series UART/SPI mode

x-英文_02

Applicable model：  
XYZ(Ultimaker、Makerbot)、Detla、CoreXY(Hbot) and CoreXZ
 
About the power continued to play function:
Lerdge-X motherboard comes with print pause, print save, boot continue to print function. For accidental power outage, power failure to save continued playing, shut down after printing finished functions, the additional power monitoring module is required.
 
About printing: 
Lerdge-X motherboard supports off-line printing by default (TF card printing or USB printing). If you need online printing, an online module is needed. 
 
About heated bed: 
If want to use Lerdge-X motherboard with heated bed, the heated bed adapter module and high-power hot bed module are required. --Recommended USB and SD card is no larger than 32G. 
Lerdge-X Size chart 1000 LerdgeX_LCD V1 Lerdge-X board interface definition diagram
Lerdge-X wiring
58397

驱动细分-EN-1000High Power Switching Module

LerdgeX parameter

LERDGE K Board description7

主版配置流程-x-enLERDGE K Board description9Xyinjian1-enLERDGE K Board description18LERDGE K Board description19X 3.5inch、文K-en-3LERDGE K Board description22

彩色界面动图

自动调平

温度

检测模块LERDGE K Board description27LERDGE K Board description28X乐积设置的优势

rongyums4_014_024_03package-XXzhuban_2_msXzhuban_3msxinzhuban_3xinzhuban_4xinzhuban_5LERDGE K Board description31LERDGE K Board description32LERDGE K Board description33

 

Shipment Payment Coming Soon!
Press Room Coming Soon!
TEVO Tarantula Pro 3D Printer parts LCD Display 3D Printer Reprap Smart Controller Reprap Ramps 1.4 2004LCD Control - Homers 3D Onlinestore

TEVO Tarantula Pro 3D Printer parts LCD Display 3D Printer Reprap Smart Controller Reprap Ramps 1.4 2004LCD Control


$12.90 USD Save Liquid error (product-template line 146): -Infinity%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

 

TEVO 3D Printer parts LCD Display 3D Printer Reprap Smart Controller MKS MINI 12864 LCD Control

Description:
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included.
This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.
 

Packing list:

1 X MKS MINI 12864LCD
 

LCD

 

• Payment Method
If you have any trouble with payment ,please contact us . We can accept any payment method you would like to choose .
 

• Quality Warranty

1.Please contact us if you have any problem of quality .

2.90 Days of quality warranty .

3.Defective items must be returned within the warranty period.
 
•Feedback
 Feedback is very important for us.We appreciate your positive feedback if you are statisfy with our products and service.
 
Please contact us before leaving any negative or neutral feedback. We will solve any problem in 24hous.

Shipment Payment Coming Soon!
Press Room Coming Soon!

3D Printer parts heating controller MKS MOSFET for heat bed/extruder MOS module exceed 30A support big current


$15.00 USD Save Liquid error (product-template line 146): -Infinity%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD
3D printer parts heating controller MKS MOSFET for heatbed extruder MOS module exceed 30A support big current 
Product Description:
Advantages :
1.  Each one will be done functional  test .
2.  Superior performance of  MOSFET (Max 280A).
3.  Extra large heat sink , the maximum current can be up to 30A or more.
4. Can use hot bed  output signal of  Ramp1.4 and MKS series  to control .
5. Can use digital signal of 5-24v to control . 
Usage :
1.  Connect  Power  to power source, please note the anode and cathode.
2.  Connect  Hotbed to heated wire , please note the anode and cathode.
3.  Connect digital control signal to Gnd,D8.
4.  Connect  the control signal of Ramps1.4 or MKS MOSFET to -Bed+
5.  Choose one signal group  to connect. 
Package included:
 MOS module
connect (1)

12345

 

 

• Payment Method
If you have any trouble with payment ,please contact us . We can accept any payment method you would like to choose .
 

• Quality Warranty

1.Please contact us if you have any problem of quality .

2.90 Days of quality warranty .

3.Defective items must be returned within the warranty period.
 
•Feedback
 Feedback is very important for us.We appreciate your positive feedback if you are statisfy with our products and service.
 
Please contact us before leaving any negative or neutral feedback. We will solve any problem in 24hous.

Shipment Payment Coming Soon!
Press Room Coming Soon!

TEVO 32bit Arm platform Smooth motherboard board MKS SBASE V1.3 open source MCU-LPC1768 support Ethernet preinstalled heatsink


$48.18 USD Save Liquid error (product-template line 146): -Infinity%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD
Name:  MKS SBASE V1.3 
 
Shipping list: 
1pcs * MKS SBASE  V1.3
1pcs * USB
 
MKS SBASE 
 
Overview 
MKS SBASE is a latest  motherboard for 3D Printer ,designed by Makserbase (MKS).
It is based  on ARM platform and uses  32bit 100M Cortex-MS MCU-LPC1768.
 
 
Respect to MKS SBASE V1.0 :
MKS SBASE V1.2 
1.Fix temperature problem.
2.Add thermocouple Pins( can't be used with 12864lcd together).
3.Create some pins P1.22 P1.23 P2.12 P2.11 P4.28 for further developing.
4.Extend  3.3V / 5V for endstops power.
5.Preassemble   two big heatsinks.
 
 
Features 
1. Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly.
2. Support highly modular open source firmware , easy for secondary development.
3. Support network function, then  proceed remote control via IE Explorer.
4. Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
5. Currents of the stepper motor can be set directly, which can avoid the damage .
6. Using high quality FR-4 4 layers PCB and special design for cooling.
7. Using professional power chip, support 12V-24V DC input.
8. Good to work with LCD12864 and MKS TFT touch screen.
(Can't work with MKS MINI12864LCD,OLED12864 and LCD2004 display.)
 
 
DSC_1655DSC_1660DSC_1671DSC_1658DSC_1662DSC_1685DSC_1684DSC_1656
Shipment Payment Coming Soon!
Press Room Coming Soon!

3D Printing touch screen RepRap controller panel MKS TFT28 V1.2 display color TFT support/WIFI/APP/outage saving for Motherboard


$34.68 USD Save Liquid error (product-template line 146): -Infinity%
/
In Stock. Ships in 24 hours

Top Items


<span class=money>$30.00 USD</span> $30.00 USD
<span class=money>$729.00 USD</span> $729.00 USD
<span class=money>$47.00 USD</span> $47.00 USD
<span class=money>$358.00 USD</span> $358.00 USD
<span class=money>$17.24 USD</span> $17.24 USD

 

Name:   MKS TFT28 V1. touch screen smart controller  
MKS-TFT28
 
Overview
MKS-TFT28, color touch screen, is researched and developed by Makerbase developers, which is suitable for open sourced 3D printers. It can work with MKS Base, MKS Gen, MKS Sbase and so on. Compared to TFT32, TFT28  supports external DC 12V and works with Ramps1.4.
Package List:
1pcs*MKS TFT32
1pcs*cable
​(Not including SD card)
 
Features­
Advantage:
2.8-inch color touch screen , support U disk and SD card.
Reserve WIFI interface，support WIFI function by adding WIFI module.
Three themes, two styles, provide the users with more choices.
Allowed to self-design the interface of booting logo and all buttons.
Allowed to add at most 13 customized function buttons.
Update the configuration and firmware by SD card, easily operate.
Support Marlin, Repetier and Smoothieware firmware, and don’t need to modify the master program.
Allowed to work with Ramps 1.4(TFT28) as well as MKS series controller board developed
by Makerbase.
Support “print from breakpoint” function,“print from power outage” and “filament detect” function.
Support “auto off after printing finishes” function with “auto off after printing finishes” module.
Please visit our Github to download firmware and mannuel.
 
DSC_1688
 
 
DSC_1688 DSC_1690 DSC_1692 DSC_1693 DSC_1697 DSC_1698 DSC_1705 DSC_1707

• Payment Method
If you have any trouble with payment ,please contact us . We can accept any payment method you would like to choose .
 

• Quality Warranty

1.Please contact us if you have any problem of quality .

2.90 Days of quality warranty .

3.Defective items must be returned within the warranty period.
 
•Feedback
 Feedback is very important for us.We appreciate your positive feedback if you are statisfy with our products and service.
 
Please contact us before leaving any negative or neutral feedback. We will solve any problem in 24hous.

Shipment Payment Coming Soon!
Press Room Coming Soon!